Gate Hardware

Old Fashioned Heavy Duty Hinges

  • Available in 7″, 12″, 14″, 16″, 18″, 20″, 24″, 30″, 36″, and 48″ lengths
  • Traditional design combined with exceptional strength
  • Ideal for gates, barns, garages, garden sheds, and carriage houses
  • Forged heavy duty straps with cast iron cups
  • Hot dipped galvanized finish
  • Our black product has a polyester powder coat finish applied over a hot dipped galvanized finish
  • Black hinges supplied with black stainless steel fasteners
  • This traditional design has been manufactured since 1850

What size hinge to use?
The rule of thumb for determining the size to use is the band should be about one quarter to one third the width of the gate or door. If the gate or door is over six feet high then a third hinge should be utilized (one hinge for every three feet of height).

Cranked Bands with Pins (8295)

  • Available in 12″, 18″, 24″, and 36″ lengths
  • Very robust
  • Traditional style
  • Can be used mounted flush with front of post or ideal when the gate needs to be set back from the front of the post and still have a tight fit (as little as 1/8″) between the gate and the post
  • Black polyester powder coat finish over hot dipped galvanized steel (bppcg)
  • If installed with both pins up then the gate can be removed easily. Installing one pin down prevents removal of the gate.

JAMB MOUNTED PIN DOWN
JAMB MOUNTED PIN DOWN
FLUSH MOUNTED PIN UP
FLUSH MOUNTED PIN UP

Flush Mount Front of gate flush with front of post most common method of installation 1/8
Flush Mount
Front of gate flush with front of post most common method of installation 1/8″ to 1/4″ space between gate and post is recommended
Jamb Mount/ Set Back Pintel mounted on side of post See table below for minimum set back and space between gate and post for each size of hnge.
Jamb Mount/ Set Back
Pintel mounted on side of post See table below for minimum set back and space between gate and post for each size of hnge.
Length of Band Pin Diameter Product Code
Inches Inches Black (BPPCG*) Hot Dipped Galvanized**
12 1/2 8295-12SP 8295-122
18 5/8 8295-18SP 8295-182
24 5/8 8295-24SP 8295-242
36 3/4 8295-36SP 8295-362

* BPPCG = Black Polyester Powder Coated over Hot Dipped Galvanized Black Stainless Steel 2 inch #12 Wood Screws Included – Sold in Pairs

** Galvanized hinges supplied with 2 inch #12 Dacromet galvanized screws

double-strap-hinges-on-gate

Double Straps (3 Inch Gap) Central Eye Hardware Sets

Double straps and pins are our best hardware combination for larger field gates, rail gates, and entrance gates.

They combine heavy duty construction and strength with easy adjustment.

Each set includes (12″, 18″, or 24″ 8312 central eye top strap, adjustable bottom gate fitting and two pins (either 8800 or 8317).

Double strap hinges sandwich the wood between the straps, virtually locking the corner at 90 degrees square.

This prevents the gate from sagging.

  • Extremely heavy duty
  • Fabricated from 2″ wide by 1/4″ thick steel
  • 3″ between straps
  • 3/4″ eye to fit our 3/4″ pins
  • Hot dipped galvanized finish
  • Optional black polyester powder coat finish over hot dipped galvanized (bppcg)
Sets With 8800 Pins
Sets With 8800 Pins
Sets With 8800 Pins
Inches For Gates Up To Galvanized BPPCG*
12 4 feet wide 8312-S122 8312-S12P
18 7 feet wide 8312-S182 8312-S18P
24 10 feet wide 8312-S242 8312-S24P
Sets With 8317 Pins
Sets With 8317 Pins
Sets With 8317 Pins
Inches For Gates Up To Galvanized BPPCG*
12 4 feet wide 8312-E122 8312-E12P
18 7 feet wide 8312-E182 8312-E18P
24 10 feet wide 8312-E242 8312-E24P

* BPPCG = Black Powder Coated Over Galvanized. Fasteners included. Optional touch up paint for bolt heads available.
All sets use the adjustable bottom fitting. If you require double strap top and bottom please order components separately.

Double Straps with Rear Eye

double_strap_with_rear_eyeDouble straps and pins are our best hardware combination for larger field gates, rail gates, and entrance gates.

They combine heavy duty construction and strength with easy adjustment.

Each set includes two of (12″, 18″, or 24″) rear eye double straps, and two mounting plates with 8″ adjustable pins.

Double strap hinges sandwich the wood between the straps, virtually locking the corner at 90 degrees square. This prevents the gate from sagging.

double_strap_sets_with_rear_eye
double_strap_sets_with_rear_eye

double_strap_set_rear_eyedouble_strap_set_rear_eye

Sets With 8324 Straps (3.0″ Between Straps)
Inches For Gates Up To Galvanized BPPCG*
12 4 feet wide 8324-S122 8324-S12P
18 7 feet wide 8324-S182 8324-S18P
24 10 feet wide 8324-S242 8324-S24P
double_strap_sets_with_rear_eye
double_strap_sets_with_rear_eye

double_strap_set_rear_eyedouble_strap_set_rear_eye

Sets With 8325 Straps (3.3″ Between Straps)
Inches For Gates Up To Galvanized BPPCG*
12 4 feet wide 8325-S122 8325-S12P
18 7 feet wide 8325-S182 8325-S18P
24 10 feet wide 8325-S242 8325-S24P

* BPPCG = Black Powder Coated Over Galvanized. Optional touch paint for bolt heads available.
Carriage bolts for mounting plates are NOT included. The length will vary with the installation.

adjustable-bottom-fitting

Adjustable Bottom Fitting

Easy adjustment. Up or down adjustment of the latch end of the gate is quick and easy requiring only a few seconds and a wrench.

 

Product Code Description
8250-002 Hot Dipped Galvanized
8250-00P Black Powder Coat over HDG

cane-bolt-latch cane-bolt-latch-2

Cane/Drop Bolt – Lockable Hot Dipped Galvanized

locked

  • 5/8” diameter x 12”, 15”, or 24” one piece lockable
  • Available in 12” (4” drop), 15” (6” drop), and 24” (10” drop)
  • Lockable (padlock not included)
  • Hot dipped galvanized or black
  • Powder coat over hdg
  • Heavy 5/8” rod

 

Length Product Code
Inches BPPCG* Galvanized
12 5000-12SP 5000-122
15 5000-15SP 5000-152
24 5000-24SP 5000-242

* BPPCG = Black Powder Coated Over Galvanized.
Cane Bolts packaged with 2” x 5/16” lag bolts

Slide Bolt Gate Latch

Combine our one piece cane bolt with the optional keep for an excellent heavy duty gate latch. In the picture to the left is a 12” (5000-122) cane bolt with a single keep (5000-002). Many of our customers use the 15” cane bolt also for this purpose. Ideal for double gates, single gates, and dumpster enclosures.

 

Length Product Code
Inches BPPCG* Galvanized
12 5000-12SP 5000-122
15 5000-15SP 5000-152
Keep 5000-00SP 5000-002

* BPPCG = Black Powder Coated Over Galvanized
Cane Bolts and Keeps packaged with 2” x 5/16” lag bolts

Heavy Duty Single Strap Hinges

heavey_duty_strap

heavey_duty_strap_hinge

  • Extremely HEAVY DUTY
  • Fabricated from 2” wide by 1/4” thick steel
  • 3/4” Eye to fit our 3/4” pins/pintels
  • Hot dipped galvanized finish or black polyester powder coat finish over hot dipped galvanized (bppcg)
  • Works well with either 8800 pins or 8256 Adjustable hinge mount with 8” threaded pin
  • Sold in Pairs (3/4” Pins sold separately

 

Length Product Code
Inches BPPCG* Galvanized
18 8307-18P 8307-182
24 8307-24P 8307-242
36 8307-36P 8307-362

* BPPCG = Black Powder Coated Over Galvanized

Chain Eye for Wood or Masonry

chain-eye

Forged stainless steel screw eye is ideal for building into wood posts. Can be used on granite or masonry post by embedding in epoxy. Use with “D” shackles or Quick Links to connect to chain. 5” overall length with 4.” shaft.

 

Description Product Code
BPPCG 3488-00P
Self Color 3488-002