Stainless Steel Contemporary Sliding Door Hardware

Klassik – Modern Stainless Steel

MWE – Klassik Stainless Steel Hardware

Typical cost for a Klassik system in a 3′ opening is $2,000.00.

The Klassik model is the base system.

It can be used universally for door panels of all types, regardless of the material.

Klassik is suitable for door panels from 8 to 44.45 mm thick.

The maximum door panel weight is 135kg.

Klassik_2 Klassik_3 Klassik_4 mwe-klassik02

Flatec I – ABP Stainless Steel

Flatec I – ABP Stainless Steel

Typical cost for a Flatec I system in a 3′ opening is $1,849.

All hardware ships directly from Atlanta, GA.

The Flatec I model is the base system.

It can be used universally for door panels of all types, regardless of the material.

Flatec I is suitable for glass door panels of 12 mm thick and wood door panels up to 44.45mm.

The maximum door panel weight is 100kg.

Flatec-2Flatec-2Flatec in WoodFlatec for Glass Doors

Supra – MWE Stainless Steel Hardware

MWE – Supra

The Supra system has been especially developed for all doors that do not allow a threaded joint or any other hardware on the door leaf surface.

Supra is mounted onto the top of the door leaf, which is the perfect solution for mirror doors, for example.

The door leaf thickness should range from ca. 20 to 76.2 mm.

MWE – SupraMWE – Supra mounted on top of the door leafMWE Supra does not allow a threaded joint on door leaf surfaceMWE Supra is perfect for mirror doors

Flatec II for Sliding Wood Doors

Flatec II System

Typical cost for a Flatec II system in a 3′ opening is $1,798.

All hardware ships directly from Atlanta, GA.

The Flatec II model is another base system.

It can only be used with wood door panels from 36 – 45mm thick.

The maximum door panel weight is 100kg.

Flatec II for Wood Sliding Doors Sliding wood door panels

Duplex – Hardware for Frameless Glass Doors

duplex-rust4

The Duplex model was specially developed for guiding large and heavy door panels.

It can be used universally for door panels of all types, regardless of the material.

Duplex is suitable for door panels from 8 to 44.45 mm thick.

The maximum door weight is 250 kg.

Duplex for heavy door panels Duplex for heavy doors

Duplex-S – Hardware for Interior Wood or Metal Doors

Duplex S

The Duplex-S model is an expansion of the “Supra” model.

The Duplex-S was developed for door panels that cannot have screws on the surface.

It is suitable for panels from 20 to 76.2mm thick made of metal and wood.

Duplex-S Duplex-S Duplex-S Model is expansion of Supra model Supra-S for panels made of wood

Terra – MWE Modern Stainless Steel Hardware

Terra – MWE Stainless Steel Hardware

The Terra sliding door system has clearly visible rollers and a running rail installed on the floor.

It is thus the floor that supports the whole load of the door leaf so that all other installation parts carry less static weight.

The Terra system is suitable for situations in which the ceiling cannot take loads and does not support the fastening of common running rail systems.

Terra sliding door system Terra system has clearly invisible rollers

Spider – Barn Door Hardware System

MWE Spider

The flagship of our premium edition, the Spider system, stands out due to its distinctive retro design as well as its sophisticated technique.

All pieces are milled with excellent workmanship and then polished or grinded by hand.

Due to its three glass point holders, this system can carry heavy door leaves like the Klassik system, with a maximum of stability.

Let yourself be inspired by this expressive design and fine technical finesse!

MWE Spider Glass System MWE Spider Glass System MWE Spider door hardware MWE Spider three glass point holders

Purist – Sliding Door Hardware

Purist sliding door hardware

Its purposely-kept simple design and the elegance of its harmonic forms make the Purist unique, from a technical point of view as well.

Thanks to its special construction which does not have any visible screw joints, grooves, edges or housings, the Purist is an excellent choice for installations that have to be cleaned frequently, for example for reasons of hygiene.

This system offers a maximum of flexibility with its flush glass point holders and its covered wall fastenings that are adjustable in all directions.

Purist has a simple design MWE Purist offers maximum flexibility with its flush glass point holders Purist is an excellent choice for installations

Akzent R

Azkent R

This system stands out for its unique MWE cutting-edge design.

It is the only system where the rollers are embedded in a housing.

The running rail and all accessories are manufactured from flat steel profile that underlines its sharp-edged look.

schiebetuer_akzent_anlage1_seite_98 schiebetuer_akzent_anlage2_seite_100 schiebetuer_akzent_einstieg_seite_97