Available in stock for immediate delivery
from El Segundo, CA
Klassik
Typical cost for a Klassik system in a 3'
opening is $1,695 if shipped from our stock.
The Klassik model is the base system. It can be used unviersally for
door panels of all types, regardless of the material. Klassik is
suitable for door panels from 8 to 50 mm thick. The maximum door panel
weight is 135kg.
The Supra system has
been especially developed for all doors that do not allow a threaded
joint or any other hardware on the door leaf surface. Supra is mounted
onto the top of the door leaf, which is the perfect solution for mirror
doors, for example. The door leaf thickness should range from ca. 20 to
80 mm.
Duplex
The Duplex model was specially developed for guiding large and heavy
door panels. It can be used universally for door panels of all types,
regardless of the material. Duplex is suitable for door panels from 8
to 50 mm thick. The maximum door weight is 250 kg.
The Duplex-S model is an expansion of the "Supra" model. The Duplex-S
was developed for door panels that cannot have screws on the surface.
It is suitable for panels from 20 to 80mm thick made of metal and
wood..
The Terra sliding door system has clearly visible rollers and a running
rail installed on the floor. It is thus the floor that supports the
whole load of the door leaf so that all other installation parts carry
less static weight. The Terra system is suitable for situations in
which the ceiling cannot take loads and does not support the fastening
of common running rail systems.
The flagship of our premium edition, the Spider system, stands out due
to its distinctive retro design as well as its sophisticated technique.
All pieces are milled with excellent workmanship and then polished or
grinded by hand. Due to its three glass point holders, this system can
carry heavy door leaves like the Klassik system, with a maximum of
stability. Let yourself be inspired by this ex-pressive design and fine
technical finesse!
Its purposely-kept simple design and the elegance of its harmonic forms
make the Purist unique, from a technical point of view as well. Thanks
to its special construction which does not have any visible screw
joints, grooves, edges or housings, the Purist is an excellent choice
for installations that have to be cleaned frequently, for example for
reasons of hygiene. This system offers a maximum of flexibility with
its flush glass point holders and its covered wall fastenings that are
adjustable in all directions.
This system stands out for its unique »MWE cutting-edge
design«. It is the only system where the rollers are embedded
in a housing. The running rail and all accessories are manufactured
from flat steel profile that underlines its sharp-edged look.
