Stainless Steel Contemporary Hardware

Klassik

Typical cost for a Klassik system in a 3′ opening is $2,000.00.
The Klassik model is the base system. It can be used universally for door panels of all types, regardless of the material. Klassik is suitable for door panels from 8 to 44.45 mm thick. The maximum door panel weight is 135kg.

Flatec I

Typical cost for a Flatec I system in a 3′ opening is $1,349. All hardware ships directly from Atlanta, GA.
The Flatec I model is the base system. It can be used universally for door panels of all types, regardless of the material. Flatec I is suitable for glass door panels of 12 mm thick and wood door panels up to 44.45mm. The maximum door panel weight is 100kg.

Supra

The Supra system has been especially developed for all doors that do not allow a threaded joint or any other hardware on the door leaf surface. Supra is mounted onto the top of the door leaf, which is the perfect solution for mirror doors, for example. The door leaf thickness should range from 20 to 80 mm.

Flatec II

Typical cost for a Flatec II system in a 3′ opening is $1,298. All hardware ships directly from Atlanta, GA.
The Flatec II model is another base system. It can only be used with wood door panels from 36 – 45mm thick. The maximum door panel weight is 100kg.

Duplex

The Duplex model was specially developed for guiding large and heavy door panels. It can be used universally for door panels of all types, regardless of the material. Duplex is suitable for door panels from 8 to 44.45 mm thick. The maximum door weight is 250 kg.

Duplex-S

The Duplex-S model is an expansion of the “Supra” model. The Duplex-S was developed for door panels that cannot have screws on the surface. It is suitable for panels from 20 to 76.2mm thick made of metal and wood.

Terra

The Terra sliding door system has clearly visible rollers and a running rail installed on the floor. It is thus the floor that supports the whole load of the door leaf so that all other installation parts carry less static weight. The Terra system is suitable for situations in which the ceiling cannot take loads and does not support the fastening of common running rail systems.

Spider

The flagship of our premium edition, the Spider system, stands out due to its distinctive retro design as well as its sophisticated technique. All pieces are milled with excellent workmanship and then polished or grinded by hand. Due to its three glass point holders, this system can carry heavy door leaves like the Klassik system, with a maximum of stability. Let yourself be inspired by this expressive design and fine technical finesse!

Purist

Its purposely-kept simple design and the elegance of its harmonic forms make the Purist unique, from a technical point of view as well. Thanks to its special construction which does not have any visible screw joints, grooves, edges or housings, the Purist is an excellent choice for installations that have to be cleaned frequently, for example for reasons of hygiene. This system offers a maximum of flexibility with its flush glass point holders and its covered wall fastenings that are adjustable in all directions.

Akzent

This system stands out for its unique MWE cutting-edge design. It is the only system where the rollers are embedded in a housing. The running rail and all accessories are manufactured from flat steel profile that underlines its sharp-edged look.

Call 1-866-815-8151 for questions about MWE stainless steel door hardware or request a quote and a Barn Door Hardware estimator will contact you in one business day.

Not the sliding door hardware you were looking for? Check out our selection of sliding door hardware kits for wood and metal doors up to 200 lb capacity, 350 lb capacity, and 400 lb to 5,000 lb capacity.